Gel seal closure for 1/2" jumper to 7/8" feeder cable

1, Install in seconds 2, Removable & reusable easily for maintenance. 3, we r factory 4, Weatherproofing kits of RF connector

HJ1212/HJ1278/HJ-D----Weatherproofing kits for BTS antenna feeder system

 

 

Three items available in this series:

HJ1212 : closure for antenna---to---1/2" feeder cable (jumper cable)HJ1278 : closure for 1/2" feeder---to---7/8" feeder cableHJ-D     : closure for grounding kits

 

 

Antenna feeder system is an important part of mobile BTS (base transceiver station). The installation and maintenance of antenna feeder system will directly influence the mobile communication quality and signal scope.The antenna feeder system is made of three parts: antenna, feeder, and connector.  Here, the protection of the connector is especially crucial. Our product is designed for this need.It is a new generation of product designed for quick sealing of antenna feeder connectors in mobile BTS. It seals completely irregular connectors and corrugated cables in mechanical sealing box to guard against the corrosion of moisture and salt fog and protect the antenna feeder connectors from stretching, twisting and knocking.  The housing contains an innovative gel material.

  

1, Fast

With special design of embedded seal pin, the installation and dismantlement can be done in a few seconds.Any non-professionals can perform the operation work and provide standard construction maintenance.

2, Economic

Over 10 years of service lifeRepeat application, reduce the maintenance and repair cost greatly (material cost, man hour cost)Reduce the economical loss of bad antenna feeder adaptor seal resulted from non-standard human factors

3, Reliable

The protection box, completely separating the adaptor from external environment, passes the most strict waterproof test and low-high temperature test, ensuring the stable and reliable electrical performance of cable and adaptor.The housing is by reinforced design with high performance engineering level macromolecule polymer, which greatly reduces the loose caused by wind load or vibration, reduces and proofs vibration, and reinforces the adaptor.Strong weatherability, resistant to ultraviolet radiation and impaction

4, Safe

Easy installation and dismantlement greatly reduces high-altitude operation time and makes the work safer.

 

Comparison with original rubber tape:

Comparison	Closure Box	Rubber Tape
Operation difficulty level	Very simple;  Don't need training on operation ; take some seconds to finish the job	Complicated; Require good operating staff; take much time
Protection Specification ( waterproof / moistureproof / salt mist resistant / high & low temperature resistant / UV-asistant/ age asistant.)	Good; Apply to many international standard.	ordinary
Lifespan	10 years	1-2 years. The tape always becomes old and crack in a enviroment with high sunshine and temperature change.
Times of Using	Many times. Reusage.	One time
Tower top operation safety.	Easy installation. Shorten the operation time on tower top	Long operation time on tower top
Maintenance cost	Low; Reusage and easy installation	High; One time use; Cause connector damage

( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v9/270435065_1/Gel_seal_closure_for_1_2_jumper.jpg' , 'http://i01.i.aliimg.com/photo/v9/270435065_2/Gel_seal_closure_for_1_2_jumper.jpg' , 'http://i01.i.aliimg.com/photo/v9/270435065_3/Gel_seal_closure_for_1_2_jumper.jpg' , 'http://i01.i.aliimg.com/photo/v9/270435065_4/Gel_seal_closure_for_1_2_jumper.jpg' , 'http://i01.i.aliimg.com/photo/v9/270435065_5/Gel_seal_closure_for_1_2_jumper.jpg' , 'http://i01.i.aliimg.com/photo/v9/270435065_6/Gel_seal_closure_for_1_2_jumper.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); Gel seal closure for 1/2" jumper to 7/8" feeder cable

Verified Information This information is Verified by Bureau Veritas and validity period is 2012/07/10 --- 2013/07/10 All the information below may covers both Gold Supplier and its related companies , Their Relationship will be affirmed according to china laws and regulations , also it will be clearly display in the full report >> Production Capacity: Product line name Production Line Capacity Actual Units Produced(Previous Year)

Antenna connector closure for telecom tower, Cable closure, FTTH optical box, Optical fiber, Hoisting grip, Cable clamp	USD 3,500,000 Per Year	USD 3,100,000

Export Market Distribution: Market Revenue(Previous Year) Total Revenue (%)

North America	USD 155,000	5.0
South America	USD 341,000	11.0
Eastern Europe	USD 310,000	10.0
Southeast Asia	USD 155,000	5.0
Africa	USD 124,000	4.0
Oceania	USD 310,000	10.0
Mid East	USD 155,000	5.0
Eastern Asia	USD 31,000	1.0
Western Europe	USD 155,000	5.0
Central America	USD 341,000	11.0
Northern Europe	USD 341,000	11.0
Southern Europe	USD 341,000	11.0
South Asia	USD 31,000	1.0
Domestic Market	USD 310,000	10.0

Production Machinery: Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition

Injection machine	MA2500	2	1.5	Acceptable
Optical fiber production line	No information	1	2.0	Acceptable
Mixing machine	SML	1	2.5	Acceptable

Production Flow: 1.Mixing material 2.Injection 1 3.Injection 2 Certification: Certified Picture Certification Name Certified By Certificate No. Product Name & Model No. Available Date-Expired Date

	ISO9001:2008	Kaixin Certification Co., Ltd., CNAS	06910Q11297R0M	Communication Equipment Hardware Parts Manufacture	2010/05/07 --- 2013/05/06

Testing Report: Report Picture Report Name Report By Product Name & Model No. Report Date

	WEEE Product Test Report	TUV	Gel Seal Closure & HJ1212	2011/10/24
	UV Product Test Report	BCT	Antenna Connector Closure for Telecom Power	2012/02/06
	Product Test Report	TUV	Silica Gel	2008/06/23
	Product Test Report	Information Department Quality Inspection Center	Antenna Connector Closure for Telecom Power & HJ1278	2011/03/30